Home / John Deere 200G Excavator

John Deere 200G Excavator

The John Deere 200G Excavator is a powerful and versatile piece of construction equipment that can be used for a wide range of tasks. With a standard digging depth of 17 feet and a maximum digging depth of 22 feet, this excavator is capable of digging deep trenches and foundations for buildings and other structures.

One of the key features of the 200G Excavator is its powerful hydraulic system, which provides smooth and precise control of the machine’s movements. This makes it easy to maneuver in tight spaces and around obstacles, and allows operators to perform tasks with precision and efficiency.

The 200G Excavator also features a wide range of attachments, including buckets, hammers, and grapples, which can be easily swapped out as needed to suit the specific task at hand. These attachments allow the excavator to be used for digging, grading, demolition, and other heavy-duty tasks.

The 200G Excavator is also equipped with a variety of safety features, including a ROPS (rollover protective structure) and a FOPS (falling object protective structure) to protect the operator in the event of an accident. It also has a back-up alarm and warning lights to alert other people on the worksite of its presence.

John Deere 200 G-Tier Mid-Size Excavator


HAWK Mechanical grapple 20t

Mechanical Grapple

BMG200 – Mechanical Grapple

HAWK Non rotating hydraulic grapple

Hydraulic Grapple

HAWK Hydraulic grapple 1

Rotary Hydraulic Grapple

HRHG200 – Rotary Hydraulic Grapple

HAWK Demolition grapple

Demolition Grapple

HDG200 – Demolition Grapple


Central lubrication at arm tip<br />

Central lubrication at arm tip

Two-piece front pipe clamping<br />

Two-piece front pipe clamping

Internal view of central lubrication grease path

Internal view of central lubrication grease path

P-Tier updates build on the proven G-Series design. Take front joint durability to new levels compared to G-Series.

  • Grease point at arm tip for easy greasing and extended uptime.
  • Better torque retention at the clamp reduces the likelihood of front hydraulic pipes moving.
  • Redesigned boom foot bushings improve durability.


download specs here DOWNLOAD


Emission Rating Tier 4 / Stage IV
Engine Manufacturer John Deere Power Tech
Number Of Cylinders 4
Displacement, ltr (Inches³) 4.5 (275)
Rated speed, rpm 2000
Engine Output – Net, kW (hp) 109 (146)
Number Of Carrier Rollers – Each Side 2
Number Of Track Rollers – Each Side 7
Track Shoe Width, mm (inches) 800 (32)


Transport Length Mono Boom, mm (ft/in) 9040 (29 ft 8 in)
Transport Height – Maximum, mm (ft/in) 3390 (11 ft 1 in)
Overall Undercarriage Width, mm (ft/in) 3000 (9 ft 10 in)
Track Length On Ground, mm (ft/in) 3370 (11 ft 1 in)
Overall Undercarriage Length, mm (ft/in) 4170 (13 ft 8 in)
Tailswing Radius, mm (ft/in) 2550 (8 ft 4 in)
Ground Clearance, mm (inches) 450 (18)
Width over fixed tracks, mm (ft/in) 3000 (9 ft 10 in)
Track Gauge, mm (ft/in) 2200 (7 ft 3 in)
Digging Reach – Mono Boom, mm (ft/in) 9940 (32 ft 7 in)
Ground Level Reach – Mono Boom, mm (ft/in) 9790 (32 ft 1 in)
Dig Height – Mono Boom, mm (ft/in) 9790 (32 ft 1 in)
Dump Height – Mono Boom, mm (ft/in) 6930 (22 ft 9 in)
Dig depth – 2.44m / 8’ft flat bottom, mm (ft/in) 6870 (22 ft 6 in)
Dig Depth – Mono Boom, mm (ft/in) 7070 (23 ft 2 in)


Fuel Tank, ltr (gallons (US)) 285 (75.3)
Hydraulic Tank, ltr (gallons (US)) 125 (33)


Ground Bearing Pressure, kPa (PSI) 32 (4.64)
Swing Speed, rpm 12.8
Swing Torque, kNm (lbf / ft) 50 (36765)
Travel Speed – High, kph (mph) 5.3 (3.3)
Tractive Force, kN (lbf) 169 (38030)
Arm Tearout, kN (lbf) 83.7 (18825)
Bucket Breakout, kN (lbf) 127 (28552)
Gradeability, % 70
End lift – 7.5m Reach, kg (lbs) 4370 (9420)
Side lift – 7.5m Reach, kg (lbs) 2830 (6110)
Total Flow, lt/min (gallons (US) / min) 382 (100)
Bucket Pressure, bar (PSI) 343 (4980)
Boost Pressure, bar (PSI) 380 (5511)


Operating Weight, kg (lbs) 20507 (45170)